PolyMod Technologies

PolyTel™ Engineered Plastics

Operational parameters are more demanding with higher pressures, larger temperature extremes, and more aggressive media than ever before.  It can be challenging to find the correct seal or bearing material to work in these conditions.  Let PolyMod® Technologies Inc. help you by putting our over 50 years of sealing knowledge to work for you.

Our PolyTel™ engineered thermoplastic materials are developed to be used in bearing applications and to support and protect sealing elements from extreme conditions such as high pressures, large extrusion clearance gaps, and hardware deflections.

 

PolyTel™ materials provide:

  • Low friction
  • Good chemical resistance
  • Good specific bearing loads
  • Good wear resistance

 

Below is a list of PolyMod® Technologies’ popular PolyTel™ compounds.  Specific materials are normally suggested by our Technical Service Team based upon your input  and  operational conditions.  This is by no means an all-inclusive list.  Other specialty compounds are available for specific applications; please consult with our Technical Service Team.

 

PolyTel™ Compound Description
PT106 Lubricated acetal Good wear resistance Low friction
PT107 Proprietary filled acetal Good wear resistance Low friction
PT108 UHMW (Ultra high molecular weight polyethylene)
High impact strength
Excellent resistance to corrosive chemicals
Extremely low moisture absorption
Very low friction
Self-lubricating
High abrasion resistance
Limited temperature resistance
PT109

TPE
Good weather resistance
Good chemical resistance
High heat resistance
Bearings and Seal jackets

PT112

Reinforced and lubricated acetal
Good wear resistance
Improved strength
Low friction

PT115

Virgin PEEK (Poly-Ether-Ether-Ketone)
Excellent extrusion and wear resistance
High impact strength
Excellent chemical resistance
Low friction

PT116

PTFE filled PEEK
Very low friction
Excellent extrusion and wear resistance
Good chemical resistance
Low friction

PT118
Carbon and PTFE filled PEEK
Outstanding extrusion and wear resistance
High temperature and load capabilities
PT120

Carbon reinforced PEEK
Enhanced compressive strength
High temperature and load capabilities

PT121

Polyamide-imide (PAI), bearing grade
High heat resistance
High compressive strength
High impact resistance
Low friction

PT130

Virgin acetal
Good fatigue life
Low moisture sensitivity
Good chemical resistance
Resistant to creep and fatigue

PT136

Virgin polyamide
Very good abrasion and wear resistance
Good mechanical properties
Low permeability to gas
Good chemical resistance

PT138

Lubricated Polyamide
Excellent abrasion and wear resistance
Low friction
Good chemical resistance

PT139

Reinforced Polyamide
Very good abrasion and wear resistance
Good mechanical properties

PT140

Bearing grade Polyamide
Very good abrasion and wear resistance
Good mechanical properties
Low permeability to gas
Good chemical resistance

polyfluor, PTFE, plastic, engineered plastic seals, plastic seals, low friction, back-up ring, back up ring, backup rings, o rings, silicone oring, silicone orings, viton oring, viton o rings, viton seals, hydraulic piston seals, hydraulic piston seal, hydraulic piston seals, hydraulic cylinder seal, hydraulic cylinder seals, hydraulic seal, hydraulic seals, seals hydraulic, seal hydraulic, hydraulic o ring, hydraulic o rings, hydraulic rod seals, hydraulic shaft seals, hydraulic shaft seal, hydraulic, hydraulic seal suppliers, cylinder seals, rubber gaskets and seals, rubber seal, rubber seals, rubber o rings, rubber o ring, rubber orings, metric o-ring, rotary seals, rotary seal, rotating shaft seals, rotary shaft seal, rotary shaft seals, shaft seals, seals rotary, seal rotary, rod seals, rod wiper seals, v-ring seals, square o rings, deltamod, wedgepak, polytel, folyfluor, high pressure seal, high pressure seals, low pressure seals, pressure seals, high temp o rings, high temperature o rings, pneumatic seal, pneumatic seals, seals and o rings, seals o rings, seals o ring, seal o rings, seal o ring, seals o, o rings and seals, o rings and things, o rings online, seal ring, seal ptfe,seal and design, ptfe o rings, low friction rubber, oring groove design, o ring sizes, o-ring materials, o ring material, buy o rings, food grade o rings, american high performance seals, busak shamban, tech help, sealing solutions, zero leak seals, zero leak seal, engineered seals, engineered sealing systems, fluid power, polymod, aerospace seals, sealing system,seals for aerospace, engineering, as9100, aerospace materials, shamban


Share:Ask!Del.icio.us!Digg!Facebook!Google!BuzzLive!Reddit!ShoutWire!StumbleUpon!Yahoo!

 


PolyMod® Technologies Inc.

AS9100C & ISO 9001:2008
Registered QMS

P.O. Box 10180
Fort Wayne, IN 46851-0180 USA
Phone : +01 (260) 436-1322
Fax : +01 (260) 432-6051
Email : sales@polymod.com